BLDMY - AMORPHOUS SILICA, PRECIPATED SILICIC ACID,
- MSDS: BLDMY
- Manufacturer: EM SCIENCE
- Product Name: AMORPHOUS SILICA, PRECIPATED SILICIC ACID,
- National Stock Number: 6850-00N018654
Product Identification
Product ID:AMORPHOUS SILICA, PRECIPATED SILICIC ACID,
MSDS Date:08/04/1988
FSC:6850
NIIN:00N018654
MSDS Number: BLDMY
Responsible Party
GIBBSTOWN, NJ 08027
US
Emergency Phone: 800-424-9300 (CHEMTREC)
Info Phone: 609-354-9200
Cage: DO242
Contractor
Telephone: 856-423-6300
Cage: 0GDF9
Ingredients
SILICA GEL
CAS: 63231-67-4
RTECS: VV7322000
OSHA PEL 6 MG/M3
ACGIH TLV: 10 MG/M3 TDUST
Hazards
LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:NO Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:MAY IRRITATE EYES ON CONTACT.
PROLONGED OR REPEATED INHALATION OF DUST MAY CAUSE LUNG
DAMAGE(PULMONARY FIBROSIS). PROLONGED SKIN CONTACT MAY CAUSE
IRRITATION.
Explanation of Carcinogenicity:NOT RELEVANT.
Effects of Overexposure:SEE HEALTH HAZARDS.
Medical Cond Aggravated by Exposure:RESPIRATORY CONDITIONS.
First Aid
First Aid:GET MED ASSISTANCE FOR ALL CASES OF OVEREXPOSURE. SKIN: WASH
WITH SOAP AND WATER. EYES: IMMED FLUSH THORO WITH WATER FOR AT
LEAST 15 MIN. INHAL: REMOVE TO FRESH AIR. INGEST: IF CONSCIOUS,
INDUCE VOMIT .
Fire Fighting
Flash Point:NONCOMBUSTIBLE
Extinguishing Media:ANY SUITABLE FOR SURROUNDING MATERIALS.
Fire Fighting Procedures:NONE INDICATED.
Unusual Fire/Explosion Hazard:NONE INDICATED.
Accidental Release
Spill Release Procedures:TAKE UP AND CONTAINERIZE FOR PROPER DISPOSAL.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.
Handling
Handling and Storage Precautions:KEEP CONTR TIGHTLY CLSD. DO NOT
BREATHE DUST. DO NOT GET IN EYES OR SKIN. WHEN POURING INTO CONTR
OF FLAM LIQ, GROUND BOTH CONTR ELECTRICALLY(SUPDAT)
Other Precautions:NONE SPECIFIED BY MANUFACTURER.
Exposure Controls
Respiratory Protection:NONE SPECIFIED BY MANUFACTURER.
Ventilation:MATERIAL SHOULD BE HANDLED OR TRANSFERRED ONLY IN AN
APPROVED FUME HOOD OR WITH ADEQUATE VENTILATION.
Protective Gloves:BUTYL, NATL RUBBER, NEOPRENE, (SUPDAT)
Eye Protection:CHEMICAL WORKERS GOGGLES .
Other Protective Equipment:PROTECTIVE CLOTHING.
Work Hygienic Practices:WASH THOROUGHLY AFTER HANDLING. DO NOT TAKE
INTERNALLY. EYE WASH AND SAFETY EQUIPMENT SHOULD BE READILY
AVAILABLE.
Supplemental Safety and Health
HNDLG/STOR PREC: TO PREVENT STATIC SPARK. PROT GLOVES: PVC OR
EQUIVALENT GLOVES.
Chemical Properties
HCC:N1
Melt/Freeze Pt:M.P/F.P Text:3110F,1710C
Spec Gravity:2.2
Solubility in Water:INSOLUBLE
Appearance and Odor:WHITE(EXCEPT INDICATING GRADES) ODORLESS CRYSTALS,
POWDER, GRANULES.
Stability
Stability Indicator/Materials to Avoid:YES
HYDROFLUORIC ACID.
Stability Condition to Avoid:DUSTING; EXTREME HEAT. HEATING ABOVE 600F
(WILL DESTROY DESICCANT PROPERTIES).
Hazardous Decomposition Products:NONE INDICATED.
Disposal
Waste Disposal Methods:TO BE PERFORMED IN COMPLIANCE WITH ALL CURRENT
LOCAL, STATE AND FEDERAL REGULATIONS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.